We believe we have an online store closer to you. Would you instead like to visit: Canada International Australia Ireland UK USA

Single-Hand Brake RIGHT

One-hand braking system for the Veloped/Walker. Both brakes (R+L) are operated with the right hand using a single brake lever. For right-hand mounting.

SKU: 11-90-015
Stock Status: In Stock
Delivery Status: 3-5 working days
63.28 €
Including Tax: 12.86 € (25.5%)
pcs

The One Hand Brake for the right hand on the Trionic Veloped and Walker rollator, when installed, allows you to control the rollator's brakes with one hand. 
  • Brake lever with linear adapter that splits the single brake cable into two.
  • Both brakes (R+L) are operated with one single brake lever.
  • For right side assembly.

User Guides

The documentation for this product includes the manuals and instructions listed below. You can choose to view the documentation online or download it for local use.

Trionic Single-Hand Brake

One-hand brake that brakes the right and left brakes simultaneously.

Assembly: Trionic single-hand brake system (pictures show Right side) 1 Assembly: Trionic single-hand brake system (pictures show Right side)

1. Mount the brake lever on the gripbar (as far to the front as possible).

2. Unscrew the screws (2x 4 pcs) that attach the R & L brake cover.

3. Attach the short brake cable to the brake on the same side as the brake lever.

4. Make sure that the cable-end nipple screw is facing outwards (wheel-direction).

5. Route the longer brake cable through the frame (betw. top & down frame tube).

6. Attach the longer brake cable to the brake positioned on the opposite side of the brake lever.

7. Cut a small hole (2x) through the fabric of the basket at each rear bottom corner (see RED circles in the picture).

8. Fasten the longer brake cable to the basket with the 2 cable-ties.

9. Re-attach the 2 brake covers again, using the 2 cable-ties with a Ø5 mm hole for the 2 upper screws (R + L side).

10. Stick one of the wheel QR-axles (Ø12 mm) through the cable-tie loop, and pull the cable-tie tight around the axle (provides the correct tension in order to avoid that the cable rubs against the tire, but without the brake cable being forced out of direction).

11. The R & L side brake cables can be individually adjusted, by using either the adjuster screws positioned at the brake, or the adjuster screws attached to the linear duplicator.

12. Make sure that the parking brake blocks the wheel completely.

Centering of the brake 2 Centering of the brake

1. Unscrew the brake collar screw 3-4 turns (reached through the brake cover hole).

2. Pull the brake lever and hold it tight.

3. While holding the brake lever tight, fasten the brake collar screw again.

4. Check that the wheel spins freely, without rubbing between brake/brake hub.

If you have any questions, please do not hesitate to contact our product manager Stefan Kindberg; +46-8-522 100 52.

Customer Reviews

Bobby Huskey
Didn’t last long
This is broken already after only a couple of months of use
John Cluny
Single-Hand Brake
Brake works very well but it was not easy to fit, and the cross-cable tends to interfere with the forward sliding of the seat.
Dennis Roberts
Brake lever adapter / converter
Contact was easy, courteous and helpful.
Delivery was quick and straightforward and the part fitted as expected.

General FAQ

Relevant Guides

Search help

Also Purchased Products

Product Reviews    

  • This has proven to be better than expected…

    I did a lot of research about rollators as I have many disabilities with my base condition being HMS. I also have some cognitive challenges now as well as balance issues and my specialist appointments are not until 2022. Some of my balance issues hav…

  • We are very !!! satisfied with the Veloped.…

    My 94-year-old mother walks 4 to 6 km a day with it in her beloved forest, it is easy to drive / steer, bumps are mastered without any problems, my mother is grateful, no longer feels as ‘shaken’ as with the old ordinary outdoor rollator.

    Suggesti…

  • I am so thankful for my Veloped which has transformed my walking enormou…

    I am so thankful for my Veloped which has transformed my walking enormously. Having suffered from balance issues for the past year walking has been extremely difficult and frustrating; even a variety of sticks didn’t help very much. I am truly amazed…

  • Veloped Tour 14er M…

    Very satisfied. Thank you!…

  • Changed My Life…

    I have a balance disorder. The Rollator Walker is great for so many reasons. It is very sturdy, engineered to turn easily. Gives me independence that I had lost. I bought an extra one so that I have one in the car and one for the yard.…

  • Trionic's customer service couldn't have been more accommodating if they tried. They helped me choose the right assistive device for my individual needs. My foldable Walker 12S rollator meets my needs for stable support and transportation that feels …

  • Great health and pleasure benefit…

    Due to an increasing neurological problem, I could only walk about 100 m before having to stop and sit down. On my first outing with the Walker, I could easily do a 400 m distance without the need to stop. I have gradually been able to increase my di…

  • Cane Holder…

    Very useful and always use it…

    Veloped Cane Holder
    by Carolyn MacLean
  • Brilliant product…

    It has been such a relief to get out and about in the countryside and be active again. It easily copes with different terrains, and the support it provides enables me to walk upright easily, as opposed to previously when I could only go a very short…

Subscribe to our newsletter!