Manual: Assembly of Bottle Holder on Walker 12er size S

Manual: Assembly of Bottle Holder on Walker 12er size S

Place of assembly of the bottle holder (R or L). 1 Place of assembly of the bottle holder (R or L).

 

Wrap the strap around the frame tube and pull it through the holder. 2 Wrap the strap around the frame tube and pull it through the holder.

Pull the strap tight and turn the nut clockwise to tighten the strap. 3 Pull the strap tight and turn the nut clockwise to tighten the strap.

 

Cut the excessive strap off. 4 Cut the excessive strap off.

 

Mount the second holder in the same way. 5 Mount the second holder in the same way.

 

The two holders correctly assembled on the frame tube. 6 The two holders correctly assembled on the frame tube.

 

Attach the bottle holder with the two screws. The “opening“ of the bottle holder should face outwards. 7 Attach the bottle holder with the two screws. The “opening“ of the bottle holder should face outwards.

 

The bottle holder is now attached to the frame and you enter the bottle from the side and remove it outwards. 8 The bottle holder is now attached to the frame and you enter the bottle from the side and remove it outwards.